Don’t share Data analyst profiles – kindly match the skills and submit the profiles
Greetings,
Kindly go with the below job descriptions, and let me know if you would match any of the requirements with your updated resume and your expected hourly rate for the position on c2c or w2 .
All positions required local consultants — required F2F Here.
- Data Center Technician openings- Kansas City, Missouri (need local candidates)(onsite)
- Data Center Break fix engineers – Richmond, VA – Nee local consultants
- Data Center Technician – Runops (Layer 1)- Kansas City, Missouri (need local candidates)(onsite)
- Data Center Technician–Location : Richmond & Henrico VA (onsite)
__________________________________________________________________________________________________________________________________________________________________________
1)Role :- Data Center Technician – Runops (Layer 1)
Location :- Kansas City, Missouri (need local candidates)(onsite)
Contract
Responsibilities:
Cabling & Termination
● The Fiber Technician will mount and install racks, patch panels, fiber optic and hardware. Install grounding for racks, equipment and cable as required.
● The Fiber Technician performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable; use a tone set.
● The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA and MPO/MTP connectors, for both multi-mode & single-mode fiber
● The Fiber Technician will terminate simplex & duplex jumper cord
● The Fiber Technician will terminate & breakout outside plant fiber
● The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber
● The Fiber Technician will install fan out kits including buffer tube
● The Fiber Technician will calculate end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber
● The Fiber Technician will fully complete all paperwork accurately and on time specifically: timesheets, material transfers, work orders, change orders, tool transfers and others as required
● The Fiber Technician will complete any other duties as assigned
Additional responsibilities
Able to provide onsite support after business hours as part of oncall schedule.
Able to travel to various sites as needed.
Testing
● The Fiber Technician will test using an OTDR, Fluke & EFXO
● The Fiber Technician troubleshoots using an OTDR to identify and correct problems end to end, and Network wide
Splicing
● The Fiber Technician will perform mechanical splicing with all types of fiber cable
● The Fiber Technician will perform fusion splicing with all types of fiber cable
● The Fiber Technician performs building entrance splices, maintenance space, and direct buried splices
Physical and Mental Requirements:
● The Fiber Technician must be self-motivated, positive in approach, professional and help create, develop, and implement project process improvement(s).
● The Fiber Technician must promote the Company culture and mission to all employees, vendors, clients, and business partners.
● The Fiber Technician must possess and be proficient with the listed tools.
● The Fiber Technician must be able to act as the Company liaison for interface with customer representative(s).
● The Fiber Technician must possess proven problem-solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s).
● The Fiber Technician must be able to work at heights, off a ladder and in confined spaces, lift up to 50 pounds and move up to 75 pounds.
● The Fiber Technician must be able to see and distinguish different colors, read small print, and hear and recognize audible signals such as dial tones.
Education, Certification, License, And Skill Requirements
● Must possess a High School diploma or GED equivalent
● Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat-cure)
● Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS)
● Prefer 3-5 years of experience in Fiber
● Prefer Industry Certifications (Corning/FOA/BICSI)
● Prefer Data Center installation experience
● Prefer Mechanical and Fusion Splice experience
● Prefer OSP / Confined Space Entry experience (splicing)
● Must be able to use the following trade Tools: Screwdriver (regular and Phillips), torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves. Punch tool with 110 block and 66 block blades, tone set, 6/8 position combo crimp tool, and Krone/3M/BIX
___________________________________________________________________________________________________________________________________________
2)Job Title: DC technician/Break fix ( Need with networking experience)
Location: Richmond, VA – Nee local consultants
Mode : Contract (6+ Months)
Please do not submit duplicate resumes which has been submitted for similar VA Locations which has been flashed today.
DC technician
· Physical layer: fiber optic connections, contamination, cleaning
· Understand ESD best practices
· Comfortable with text based CLI
· Familiar with IP based networking
· A+/Network+ level of knowledge required
· Good understanding of OSI layer and network principles
· 2+ years of DC experience required
· 4+ years of IT related experience required
· Familiarity with the Linux based systems and experience with scripting and automation (Bash, Python, Perl)
· Understanding BGP routing protocols, spanning tree, VRRP, LACP
· Good organization, multitasking and communication skills
· Microsoft Office Tools: Word, Outlook, Excel
· Understanding of network procedures, environmental and safety management in a DC environment
Culture / Team fit
· Ambitious / Hard working / Go getter / Coachable / Mentor
Responsibilities:
· Physical hardware swaps: (Fabric and Backbone)
o Optical transceiver swaps / Circuit diagnosis
o Line card swap
o TOR Replacement
o Work with vendors for RMA's
o Must be able to lift 50lbs
· Asset Management
· Tools and Ticket management
· Build relationships with partner teams within the DC
· Ability to review hardware logs, isolate and identify root cause
· Remote link troubleshooting
· Ability to mentor and guide L1 resource
_______________________________________________________________________________________________________________________________________________________________
3)Role :- Data Center Technician – Runops (Layer 1)
Location :- Kansas City, Missouri (need local candidates)(onsite)
Responsibilities:
Cabling & Termination
● The Fiber Technician will mount and install racks, patch panels, fiber optic and hardware. Install grounding for racks, equipment and cable as required.
● The Fiber Technician performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable; use a tone set.
● The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA and MPO/MTP connectors, for both multi-mode & single-mode fiber
● The Fiber Technician will terminate simplex & duplex jumper cord
● The Fiber Technician will terminate & breakout outside plant fiber
● The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber
● The Fiber Technician will install fan out kits including buffer tube
● The Fiber Technician will calculate end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber
● The Fiber Technician will fully complete all paperwork accurately and on time specifically: timesheets, material transfers, work orders, change orders, tool transfers and others as required
● The Fiber Technician will complete any other duties as assigned
Additional responsibilities
Able to provide onsite support after business hours as part of oncall schedule.
Able to travel to various sites as needed.
Testing
● The Fiber Technician will test using an OTDR, Fluke & EFXO
● The Fiber Technician troubleshoots using an OTDR to identify and correct problems end to end, and Network wide
Splicing
● The Fiber Technician will perform mechanical splicing with all types of fiber cable
● The Fiber Technician will perform fusion splicing with all types of fiber cable
● The Fiber Technician performs building entrance splices, maintenance space, and direct buried splices
Physical and Mental Requirements:
● The Fiber Technician must be self-motivated, positive in approach, professional and help create, develop, and implement project process improvement(s).
● The Fiber Technician must promote the Company culture and mission to all employees, vendors, clients, and business partners.
● The Fiber Technician must possess and be proficient with the listed tools.
● The Fiber Technician must be able to act as the Company liaison for interface with customer representative(s).
● The Fiber Technician must possess proven problem-solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s).
● The Fiber Technician must be able to work at heights, off a ladder and in confined spaces, lift up to 50 pounds and move up to 75 pounds.
● The Fiber Technician must be able to see and distinguish different colors, read small print, and hear and recognize audible signals such as dial tones.
Education, Certification, License, And Skill Requirements
● Must possess a High School diploma or GED equivalent
● Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat-cure)
● Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS)
● Prefer 3-5 years of experience in Fiber
● Prefer Industry Certifications (Corning/FOA/BICSI)
● Prefer Data Center installation experience
● Prefer Mechanical and Fusion Splice experience
● Prefer OSP / Confined Space Entry experience (splicing)
● Must be able to use the following trade Tools: Screwdriver (regular and Phillips), torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves. Punch tool with 110 block and 66 block blades, tone set, 6/8 position combo crimp tool, and Krone/3M/BIX.
_______________________________________________________________________________________________________________________________________________________________
4)Title :Data Center Technician
Location : Richmond & Henrico VA (onsite)
– Nee local consultants
Job Description – Runops
Responsibilities:
Cabling & Termination
● The Fiber Technician will mount and install racks, patch panels, fiber optic and hardware. Install grounding for racks, equipment and cable as required.
● The Fiber Technician performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable; use a tone set.
● The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA and MPO/MTP connectors, for both multi-mode & single-mode fiber
● The Fiber Technician will terminate simplex & duplex jumper cord
● The Fiber Technician will terminate & breakout outside plant fiber
● The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber
● The Fiber Technician will install fan out kits including buffer tube
● The Fiber Technician will calculate end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber
● The Fiber Technician will fully complete all paperwork accurately and on time specifically: timesheets, material transfers, work orders, change orders, tool transfers and others as required
● The Fiber Technician will complete any other duties as assigned
Additional responsibilities
Able to provide onsite support after business hours as part of oncall schedule.
Able to travel to various sites as needed.
Testing
● The Fiber Technician will test using an OTDR, Fluke & EFXO
● The Fiber Technician troubleshoots using an OTDR to identify and correct problems end to end, and Network wide
Splicing
● The Fiber Technician will perform mechanical splicing with all types of fiber cable
● The Fiber Technician will perform fusion splicing with all types of fiber cable
● The Fiber Technician performs building entrance splices, maintenance space, and direct buried splices
Physical and Mental Requirements:
● The Fiber Technician must be self-motivated, positive in approach, professional and help create, develop, and implement project process improvement(s).
● The Fiber Technician must promote the Company culture and mission to all employees, vendors, clients, and business partners.
● The Fiber Technician must possess and be proficient with the listed tools.
● The Fiber Technician must be able to act as the Company liaison for interface with customer representative(s).
● The Fiber Technician must possess proven problem-solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s).
● The Fiber Technician must be able to work at heights, off a ladder and in confined spaces, lift up to 50 pounds and move up to 75 pounds.
● The Fiber Technician must be able to see and distinguish different colors, read small print, and hear and recognize audible signals such as dial tones.
Education, Certification, License, And Skill Requirements
● Must possess a High School diploma or GED equivalent
● Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat-cure)
● Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS)
● Prefer 3-5 years of experience in Fiber
● Prefer Industry Certifications (Corning/FOA/BICSI)
● Prefer Data Center installation experience
● Prefer Mechanical and Fusion Splice experience
● Prefer OSP / Confined Space Entry experience (splicing)
● Must be able to use the following trade Tools: Screwdriver (regular and Phillips), torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves. Punch tool with 110 block and 66 block blades, tone set, 6/8 position combo crimp tool, and Krone/3M/BIX.
5)Role – BreakFix Engineer
Location – Kansas City– Nee local consultants
Basic Requirements:
· Culture / Team fit
· Ambitious / Hard working / Go getter / Coachable / Mentor
· Physical layer: fiber optic connections, contamination, cleaning
· Understand ESD best practices
· Comfortable with text based CLI
· Familiar with IP based networking
· A+/Network+ level of knowledge required
· Good understanding of OSI layer and network principles
· 2+ years of DC experience required
· 4+ years of IT related experience required
· Familiarity with the Linux based systems and experience with scripting and automation (Bash, Python, Perl)
· Understanding BGP routing protocols, spanning tree, VRRP, LACP
· Good organization, multitasking and communication skills
· Microsoft Office Tools: Word, Outlook, Excel
· Understanding of network procedures, environmental and safety management in a DC environment
Responsibilities:
· Physical hardware swaps: (Fabric and Backbone)
o Optical transceiver swaps / Circuit diagnosis
o Line card swap
o TOR Replacement
o Work with vendors for RMA's
o Must be able to lift 50lbs
· Asset Management
· Tools and Ticket management
· Build relationships with partner teams within the DC
· Ability to review hardware logs, isolate and identify root cause
· Remote link troubleshooting
· Ability to mentor and guide L1 resource
Regards
Pavan
VDart Inc
Ph: (470) 251-2584 Ext:1866
Email: Pavankumar.s@vdartinc.com
Website: https://vdart.com
Confidentiality Notice
The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer.
—
You received this message because you are subscribed to the Google Groups “pavan_requirements” group.
To unsubscribe from this group and stop receiving emails from it, send an email to pavan_requirements+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/pavan_requirements/CAGf9M0-LQkScq%2Bsdmsn_5rhZyjyV2%2Bo92b%3DfCa7Wa_ZSd%2BuU-g%40mail.gmail.com.